Home > News > Industry news >

Safety Code for Production of Power Cord Cable Industry

Safety Code for Production of Power Cord Cable Industry
Issue Time:2017-09-01

Safety Code for Production of Power Cord Cable Industry

1.Power cord operators must be trained in specialized technical training, qualified and certificates.
2 Before the car must check the safety of the machine, enveloped is solid.
3 Producers can not stay beside the grenade.
4, the lower plate must be properly fixed after the turntable operation.
5 When the machine is running, it is forbidden to fill, clean or repair the machine.
6 Prohibit the use of tools or other things on the machine.
7 When the machine is actuated, it is forbidden to rely on the machine or safety device to prohibit the delivery of any objects above the machine.
8 When a failure occurs, stop immediately and inform the team leader of the deal.
9 When the work is finished or stopped, the power cord should be cut off immediately.
Into the cable on the scratches, scrapped on the edge of the line, the line can not be inserted beyond the disk side of the plate side of the cable does not meet the pitch, stepless pitch is not adjusted, according to process requirements through the stepless transformation , Re-adjust the pitch line core broken shares, times the stock, take-up reel and the tension between the reel does not match the adjustment between the reel and the reel between the tension, so that match line cable power Line uneven height, cable screw without lubricating oil, screw wear large, timely refueling, please fitter repair.
AC power cord

Professional production line solution provider!